The Problems Should Be Paid Attention To In The Operation Of Ultrasonic Welding Machine

Ultrasonic welding machine is widely used in plastic products industry. With the increasing demands of plastic products industry, more and more ultrasonic welding machines are used, so what problems should be noticed in the operation of ultrasonic welding machine?

1. First of all, the ultrasonic welding machine must have a stable voltage hot melt machine, unstable voltage may cause damage to the ultrasonic welding machine, so the ultrasonic welding machine should be equipped with a voltage regulator. The ultrasonic welding machine can be operated in stable voltage environment.

2. When ultrasonic welding machine works, do not put your hands under the mold. When the ultrasonic welding machine is pressed down, the pressure is large. If it is put under the mold, the consequences are unthinkable.

3. When changing the welding mold of the vibration friction welding machine, must tighten the mold, if it mot tightened may cause ultrasonic welding machine damage.

4. The welding depth of the product is too deep or too shallow, the depth of the adjustment is adjusted, and the riveting machine is gradually adjusted according to the welding condition of the product.

5. If the welding surface of the product is scalded or scratched, the corresponding part of the mold shall be polished according to the situation of the welding part of the product, or a film shall be placed on the product.This can effectively alleviate the welding surface damage