With the rapid development of industrial production, plastics are widely used in various fields of national economy and people's life because of their light weight, high specific strength, corrosion resistance and easy processing. However, due to processing techniques and the like, many complicated products cannot be formed at one time, and it is necessary to seamlessly connect a plurality of components together, and there are basically two methods: bonding and welding. The welding process of ultrasonic spot welding machines has been more and more widely used.
Ultrasonic spot welding machine method introduction
1. Connect one end of the cable to the output control cable connector on the vibration tube, and the other end to the output control cable socket on the back of the power box and tighten.
2. Wipe the joint surface of the welding head, connect it to the transducer of the vibration tube, and lock it with a wrench. Note: When connecting, make sure that the two connecting faces between the welding head and the transducer match and lock. Do not use the connecting screw to be too long or the sliding teeth cannot be locked. Otherwise, the sound wave will not be transmitted smoothly and the machine will be damaged.
3. When loading and unloading the welding head, two wrenches must be used to clamp the welding and the transducer respectively. It is not allowed to lock or load or remove one of the cards to avoid damage to the portable vibration cylinder.
4. After checking the installation of the 1st and 2nd points, plug the power cord socket into the external power socket and pull the power switch. At this time, the power indicator light is on.
5, light pressure sound wave control switch, then you can hear the sound of the sound of the welding hair when the sound wave is transmitted to the welding head, indicating that the machine works normally and can be put into use.
6. When the machine is abnormal in operation, do not open the device without permission. Please inform the supplier or send the device to the manufacturer for inspection and repair.