Failure analysis of ultrasonic slitter
Ultrasonic slitting machine uses oil cylinder imported from Germany; correction system imported from Italy; ultrasonic system imported from the United States and steel imported from Taiwan; thereby greatly improving the stability of equipment operation and production efficiency, ultrasonic cutting forming edges, edges, sides, automatic seals and Cut beautiful units.
1. Some fabrics are not separated. ① Check the tool heating, the heating tube is energized or the broken circuit breaker between the tool and the drum, the second observation distance to check whether the tool is in place.
2. Cloth bag, because the temperature is too low, it can appropriately increase the temperature.
3. The particles with black coke on the edge are usually too high in temperature, and the temperature can be lowered appropriately.
4. When the feeding shaft on the fabric with circles appears too loose or too tight, adjust the screw shaft through the left brake spring and the risk of guarantee.