How to extend the life of an ultrasonic vibrator
Vibrating rods play an important role in ultrasonic cleaning, and care must be taken during use to extend their life. Let's take a look at the following precautions.
1. Regularly check the ultrasonic vibration stick.
Please check regularly during use, and check if there is any deviation in the wire connector during maintenance. When the ground resistance is too low, it must be dried. In addition, the cover of the ultrasonic vibration rod is also periodically opened, so that the dust stored on the circuit board is blown away by compressed air, thereby increasing the service life. As long-term use will produce adhesion on the surface, not only the actual effect of cleaning the object will also affect the service life.
2. Place in a ventilated environment.
Everyone knows that electrical products cannot be placed in a humid environment. When they are placed for a long time, they will corrode and damage electrical products. Ultrasonic vibration rods are no exception. Therefore, you need to maintain a stable and natural Ventilate the environment to avoid water vapor and smoke corrosion and shorten its service life. Even if you use it, remember to regularly clean the surface of dirt and stains to keep the interior clean. The service life is also related to good maintainability, not close to corrosive chemical environment, because it is made of stainless steel, and places close to acid will corrode stainless steel. In addition, please keep the equipment clean and drain dirty water when not in use.