Ultrasonic cutting equipment for cutting and fusion, which in the textile industry weaving, finishing, clothing sewing and other aspects have been increasingly widely recognized.
Wide range
All kinds of textile materials can be cut by ultrasonic. For example, natural fiber, synthetic fiber, including aromatic polyamide fiber, carbon fiber and glass fiber, woven fabrics, non-woven fabrics and knitted fabrics can be cut by ultrasonic.
pollution-free
When ultrasonic cutting, the equipment is only heated to about 50 ℃, so it will not produce smoke and odor, and it also eliminates the danger of injury and fire when cutting.
High reliability
When the ultrasonic cutting equipment works, it will produce electromagnetic vibration of 20-40khz, which is transformed into mechanical vibration by piezoelectric ceramics. This oscillation is transmitted to the ultrasonic cutter and the material to be cut, and heat is generated from the inside of the cutter, then the material is mechanically divided. In contrast to high temperature cutting, ultrasonic mainly uses mechanical energy rather than thermal energy, and has less wear on the ultrasonic cutter.
Cut neatly
The cutting edge is very neat, and the warp and weft of the fabric will not shift or come out. Cotton and viscose fabrics can be cut at speeds up to 10 m / min on stretcher and cylinder fabric slitter. When the non thermoplastic material is cut, the fiber is processed or the edge of the fiber is fused after it enters the ultrasonic working area.