Ultrasonic Spray Atomizer

The ultrasonic spray (atomizer) is composed of an ultrasonic transducer, a casing, a horn, an atomizing head and a driving power source. Ultrasonic spray (atomization) is the use of the energy of ultrasonic waves to break up water or liquid to form tiny particles of several μm to more than 100 μm for humidification, liquid granulation, mixing, chemical reaction, spraying, Metal melt milling and other purposes.

The power source of the high-power ultrasonic atomization humidification technology is a high-power ultrasonic longitudinal transducer, and the whole machine is composed of an ultrasonic transducer, a horn, a transmitting head and a dedicated driving power source. The transducer drives the emitter to vibrate at high frequency, applies ultrasonic force to water or other liquid, breaks up the flowing liquid into fine particles, and sprays it into the air to achieve the purpose of spraying (atomization). It is characterized by low working frequency and high power; high atomization efficiency, the atomization amount of a single transducer can be large or small, and the atomization amount of one unit can exceed 100L/h at most; there is no restriction on the medium, even sewage, chemical industry Liquid and oil mucus can also be atomized. No pressure, no noise, no nozzle wear and blockage problems. The energy consumption is low, the volume of the single machine is small; the atomization amount can be adjusted at will, which is most suitable for application in the industrial field. By combining, the amount of atomization can meet any requirement of the user.

Ultrasonic spray system has also been replaced by traditional pressure spray systems, which are widely used in various industrial processes and research and development. Especially in the field of micro coating, the ultrasonic spray system produces more accurate fog, easier control and more environmental protection. .

Ultrasonic spray (atomizer) also has an outstanding advantage, it can work at high temperatures of hundreds of degrees, the maximum temperature is over 500 °C. Therefore, it can be used for metal powder production, and the process is simple and the efficiency is high. Through the different design of the spray head, he can adapt to a variety of different milling requirements. From the rapid and simple small amount of milling in the laboratory to the large-scale industrial milling of the production line, it is possible to achieve.

Hot Tags: ultrasonic spray atomizer, China ultrasonic spray atomizer suppliers, manufacturers, factory